TM 1-1520-238-23
11-304
11.65.
CPG CYCLIC STICK COVER REMOVAL/INSTALLATION – continued
f. Remove cyclic stick cover (12) from CPG sta-
tion floor (13).
(1) Remove 14 screws (14) and washers (15)
from cover (12) and foot guard (16).
(2) Remove grommet (17) and cable (18) from
cover (12).
(3) Remove cover (12) from stick (3).
11.65.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
11.65.5. Inspection
a. Check removed and attaching parts for dam-
age and wear (para 11.5).
b. Check removed and attaching parts for corro-
sion (para 1.49).
11.65.6. Installation
a. Install cover (12) on stick (3).
(1) Position cable (18) in grommet (17).
(2) Install grommet (17) in cover (12).
(3) Position cover (12) and foot guard (16) on
floor (13).
(4) Aline mounting holes.
(5) Install 14 screws (14) through washers (15),
cover (12), foot guard (16), and floor (13).
GO TO NEXT PAGE
M04-1674-5
15
14
16
14
14
15
15
12
17
13
3
18
M04-1674-8
12
3
14
15
18
13
16
17
