TM 1-1520-238-23
11-435
11.99.
LATERAL F.S. 132.84 PUSH-PULL ROD ASSEMBLY REMOVAL/INSTALLATION – continued
WARNING
To prevent injury, maintenance per-
sonnel shall be warned before moving
controls. If injury occurs, seek medi-
cal aid.
11.99.3. Removal
a. Enter pilot station (para 1.56). Observe all
safety precautions.
CAUTION
To prevent damage to flight control
system components, do not use force
if binding or roughness occurs while
moving controls with hydraulic power.
To prevent damage to flight control
system components, do not use force
to aline bellcrank with bracket or to
aline push–pull rod with bellcrank.
b. Slowly move pilot cyclic stick (1) to aline later-
al rig pin hole (2) in cyclic stick support.
(1) Install -5 rig pin (3) in hole (2).
c. Remove external primary hydraulic power
(para 1.72).
d. Install cyclic stick warning cover (4).
GO TO NEXT PAGE
M04-4377-2
4
1
1
2
3
