TM 1-1520-238-23
11-430
11.98.
PILOT CYCLIC LATERAL PUSH-PULL ROD ASSEMBLY REMOVAL/INSTALLATION
11.98.1. Description
This task covers:
Removal. Cleaning. Inspection. Installation.
11.98.2. Initial Setup
Tools:
Aircraft mechanic’s tool kit (item 376, App H)
10 - 50 inch-pound 1/4-inch drive click type torque
wrench (item 434, App H)
Materials/Parts:
Cotter pin (2)
Personnel Required:
67R
Attack Helicopter Repairer
67R3F
Attack Helicopter Repairer/Technical
Inspector
References:
TM 9-1090-208-23
TM 1-1520-238-T
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
11.46
Pilot cyclic stick cover re-
moved
2.2
Access fairing L140 re-
moved
TM 9-1090-208-23
Flex chute disconnected
from area weapon
TM 9-1090-208-23
Ammunition conveyor for-
ward of left main landing
gear leg disconnected
WARNING
To prevent injury, maintenance per-
sonnel shall be warned before moving
controls. If injury occurs, seek medi-
cal aid.
11.98.3. Removal
a. Remove lateral decoupler access cover (1)
from airframe (2).
(1) Remove 15 screws (3) and washers (4).
(2) Remove cover (1).
GO TO NEXT PAGE
M04-4376-1
M04-4376-2
4
3
2
1
