TM 1-1520-238-23
11-672
Change 3
11.152. PILOT DIRECTIONAL SHEAR PIN ACTIVATED DECOUPLER (SPAD) REMOVAL – continued
d. Detach connector (A334)P1 (1) from recep-
tacle J269 (2).
e. Remove position transducer (3) from SPAD
(4).
(1) Remove and discard cotter pin (5).
(2) Remove nut (6).
(3) Remove bolt (7), washer (8), and bushing (9).
f. Remove directional push-pull rod (10) from
SPAD (4).
(1) Remove and discard cotter pin (11).
(2) Remove nut (12).
(3) Remove bolt (13), washer (14), and bushing
(15).
g. Remove feel spring cartridge (16) from SPAD
(4).
(1) Remove and discard cotter pin (17).
(2) Remove nut (18).
(3) Remove bolt (19), washer (20), and bushing
(21).
h. Remove directional push-pull rod (22) from
SPAD (4).
(1) Remove and discard cotter pin (23).
(2) Remove nut (24).
(3) Remove bolt (25), washer (26), and bushing
(27).
GO TO NEXT PAGE
1
M04-1808-2
7
9
8
3
5
6
4
2
M04-1808-3
13
1510
4
12
11
14
M04-1808-4
21
19
20
17
4
18
16
25
26
27
4
22
M04-1808-5
24
23
