TM 1-1520-238-23
Change 1
11-669
11.151. DIRECTIONAL F.S. 121.40 BELLCRANK AND BRACKET REMOVAL/INSTALLATION – continued
c. Install rod end (5) on bellcrank (6). Torque nut
(8) 30 to 40 INCH-POUNDS.
(1) Aline rod end (5) with bellcrank (6).
(2) Install bolt (9) through washer (10), bushing
(11), rod end (5), and bellcrank (6).
(3) Check fit of self-retaining bolt (9) (para 11.1).
(4) Install nut (8). Torque nut (8) to 30 INCH-
POUNDS. Use torque wrench.
(5) Increase torque to aline cotter pin hole, but do
not exceed 40 INCH-POUNDS.
(6) Install new cotter pin (7).
d. Install rod end (12) and link (13) on bellcrank
(6). Torque nut (15) 30 to 40 INCH-POUNDS.
(1) Install bushing (19) on bellcrank (6).
(2) Aline rod ends (12) and link (13) with bell-
crank (6).
(3) Install bolt (16) through washer (17), bushing
(18), rod end (12), bellcrank (6), link (13), and
bushing (19).
(4) Check fit of self-retaining bolt (16) (para
11.1).
(5) Install nut (15). Torque nut (15) to 30 INCH-
POUNDS. Use torque wrench.
(6) Increase torque to aline cotter pin hole, but do
not exceed 40 INCH-POUNDS.
(7) Install new cotter pin (14).
GO TO NEXT PAGE
13
6
17
12
14
15
19
18
16
5
M04-3390-5A
7
8
11
10
9
