TM 1-1520-238-23
11-709
11.161.
CPG TO PILOT CONTROL DIRECTIONAL F.S. 118.50 BELLCRANK
REMOVAL/INSTALLATION – continued
b. Remove link (8) from bellcrank (2).
(1) Remove and discard cotter pin (9).
(2) Remove nut (10).
(3) Remove bolt (11), washer (12), and bushing
(13).
(4) Remove link (8) from bellcrank (2).
c. Remove bellcrank (2) from bracket (14).
(1) Remove and discard cotter pin (15).
(2) Remove nut (16).
(3) Remove bolt (17), washer (18), and bushing
(19).
(4) Remove bellcrank (2).
11.161.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
11.161.5. Inspection
a. Check removed and attaching parts for dam-
age (para 11.5).
b. Check removed and attaching parts for corro-
sion (para 1.49).
c. Check all installed bushing(s) and/or bear-
ing(s) for wear (para 11.5).
d. Check all removed bushing(s) and/or bear-
ing(s) for wear (para 11.4).
GO TO NEXT PAGE
2
13
11
12
8
9
10
M04-4354-3
16
15
14
2
17
M04-4354-4
18
19
