TM 1-1520-238-23
11-710
11.161. CPG TO PILOT CONTROL DIRECTIONAL F.S. 118.50 BELLCRANK
REMOVAL/INSTALLATION – continued
11.161.6. Installation
CAUTION
To prevent damage to flight control sys-
tem components, do not use force to
aline bellcrank with bracket or to aline
push-pull rod with bellcrank.
a. Install bellcrank (2) on bracket (14). Torque nut
(16) 30 to 40 INCH-POUNDS.
(1) Aline bellcrank (2) with bracket (14).
(2) Install bolt (17) through washer (18), bushing
(19), bracket (14), and bellcrank (2).
(3) Check fit of self-retaining bolt (17) (para
11.1).
(4) Install nut (16). Torque nut (16) to 30 INCH-
POUNDS. Use torque wrench.
(5) Increase torque to aline cotter pin hole, but do
not exceed 40 INCH-POUNDS.
(6) Install new cotter pin (15).
b. Install link (8) on bellcrank (2). Torque nut (10)
30 to 40 INCH-POUNDS.
(1) Aline link (8) with bellcrank (2).
(2) Install bolt (11) through washer (12), bushing
(13), bellcrank (2), and rod (8).
(3) Check fit of self-retaining bolt (11) (para 11.1).
(4) Install nut (10). Torque nut (10) to 30 INCH-
POUNDS. Use torque wrench.
(5) Increase torque to aline cotter pin hole, but do
not exceed 40 INCH-POUNDS.
(6) Install new cotter pin (9).
GO TO NEXT PAGE
14
16
15
2
M04-4354-6
17
18
19
2
13
11
12
8
9
10
M04-4354-7
