TM 1-1520-238-23
11-722
11.164. DIRECTIONAL F.S. 121.40 PUSH-PULL ROD ASSEMBLY REMOVAL/INSTALLATION – continued
11.164.3. Removal
a. Remove rod end (1) from bellcrank (2).
(1) Remove and discard cotter pin (3).
(2) Remove nut (4).
(3) Remove bolt (5), washer (6), and bushing (7)
from bellcrank (2).
(4) Remove rod end (1) and bushing (8).
b. Remove push-pull rod assembly (9) from bell-
crank (10).
(1) Remove and discard cotter pin (11).
(2) Remove nut (12).
(3) Remove bolt (13), washer (14), and bushing
(15).
(4) Remove rod assembly (9).
GO TO NEXT PAGE
6
1
3
8
7
5
2
4
M04-4374-6
M04-4374-2
10
12
11
9
14
13
15
