TM 1-1520-238-23
11-734
11.167. DIRECTIONAL F.S. 159.98 BELLCRANK AND BRACKET REMOVAL/INSTALLATION – continued
c. Remove bracket (24) and bellcrank (25) from
bracket (13).
(1) Remove and discard two cotter pins (26).
(2) Remove two nuts (27).
(3) Remove two bolts (29), washers (30), and
bushings (28 from bellcrank (25) and rod
ends (31) and (32).
(4) Remove four nuts (33) and washers (34).
(5) Remove four bolts (35).
(6) Remove bracket (24), bracket (36), and bell-
crank (25) from bracket (13).
d. Remove rod ends (37) and (38) from bell-
cranks (39) and (40).
(1) Remove and discard cotter pins (41) and
(42).
(2) Remove nuts (43) and (44).
(3) Remove bolt (45) and washer (46) from rod
end (37) and bellcrank (39).
(4) Remove bolt (47) and washer (48) from rod
end (38) and bellcrank (40).
GO TO NEXT PAGE
M04-3392-7
13
32
26
27
27
26
31
29
25
35
35
36
34
33
34
33
24
28
30
30
28
43
41
37
45
46
42
44
48
47
M04-3392-8
38
40
39
