TM 1-1520-238-23
11-746
11.169.
DIRECTIONAL F.S. 164.33 PUSH-PULL ROD REMOVAL/INSTALLATION – continued
11.169.3. Removal
a. Remove adjustable end of directional control
push-pull rod (1) from aft bellcrank (2).
(1) Remove and discard cotter pin (3).
(2) Remove nut (4).
(3) Remove bolt (5).
(4) Remove rod (1).
b. Remove non-adjustable end of rod (1) from
forward bellcrank (6).
(1) Remove and discard cotter pin (7).
(2) Remove nut (8).
(3) Remove bolt (9), washer (10), and bushing
(11).
(4) Remove rod (1).
11.169.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
11.169.5. Inspection
a. Check removed and attaching parts for dam-
age (para 11.5).
b. Check removed and attaching parts for corro-
sion (para 1.49).
c. Check all installed bushing(s) and/or bear-
ing(s) for wear (para 11.5).
d. Check all removed bushing(s) and/or bear-
ing(s) for wear (para 11.4).
GO TO NEXT PAGE
1
4
3
M04-1794-2
2
5
8
11
7
6
10
9
1
M04-1794-3
