TM 1-1520-238-23
11-821
11.187. LATERAL MAGNETIC BRAKE MECHANISM ASSEMBLY DISASSEMBLY/ASSEMBLY
(AVIM) – continued
11.187.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
11.187.5. Inspection
a. Check removed and attaching parts for dam-
age (para 11.5).
b. Check removed and attaching parts for corro-
sion (para 1.49).
c. Check all installed bushing(s) and/or bear-
ing(s) for wear (para 11.5).
d. Check all removed bushing(s) and/or bear-
ing(s) for wear (para 11.4).
11.187.6. Assembly
a. Install bellcrank (2) on housing (9). Torque nut
(11) 30 to 40 INCH-POUNDS.
(1) Install spacer (16) and bearing (15) on bell-
crank (2).
(2) Aline bellcrank (2) with housing (9).
(3) Install bolt (12) through washer (13), bushing
(14), housing (9), and bellcrank (2).
(4) Check fit of self-retaining bolt (12) (para
11.1).
(5) Install nut (11). Torque nut (11) to 30 INCH-
POUNDS. Use torque wrench.
(6) Increase torque to aline cotter pin hole, but do
not exceed 40 INCH-POUNDS.
(7) Install new cotter pin (10).
GO TO NEXT PAGE
9
M04-4419-5
2
16
15
11
10
12
14
13
