TM 1-1520-238-23
11-976
11.228.
STABILATOR CONTROLLER CIRCUIT CARD ASSEMBLY (CCA) REMOVAL/INSTALLATION
(AVIM) – continued
11.228.7. Installation
a. Attach grounding strap.
b. Install CCA (4) in controller (5). Torque locking
screws (6) 20 INCH-OUNCES.
(1) Remove CCA (4) from storage bag.
(2) Remove discharger (8).
(3) Place CCA (4) in appropriate card guide (7).
(4) Install CCA (4) in controller (5) until seated in
appropriate connector (10).
(5) Torque locking screws (6) 20 INCH-
OUNCES. Use torque wrench.
c. Inspect (QA).
d. Install cover (1). Torque 10 screws (2) 56 INCH-
OUNCES.
(1) Position cover (1) on control unit (5).
(2) Install 10 screws (2) and washers (3).
(3) Torque 10 screws (2) 56 INCH-OUNCES.
Use torque wrench.
e. Inspect (QA).
f. Perform
appropriate
functional
test
(TM 11-6625-3085-12).
END OF TASK
M04-3601-5
8
4
6
5
10
7
M04-3601-6
3
2
1
5
