TM 1-1520-238-23
Change 1
11-1007
11.235.
PILOT DIRECTIONAL CONTROL PEDAL RELEASE SHAFT ASSEMBLY
REMOVAL/INSTALLATION – continued
11.235.4. Cleaning
a. Clean removed and attaching parts or sur-
faces (para 1.47).
11.235.5. Inspection
a. Check removed and attaching parts for
cracks. None allowed.
b. Check removed and attaching parts for dam-
age (para 11.232).
c. Check removed and attaching parts for corro-
sion (para 1.49).
d. Check all installed bushing(s) and/or bear-
ing(s) for wear (para 11.232).
e. Check all removed bushing(s) and/or bear-
ing(s) for wear (para 11.4).
11.235.6. Installation
a. Install shaft (12) on release nut (18).
(1) Install shaft (12) on release nut (18).
(2) Install rigging nut (24) on shaft (12).
(3) Rig shaft to mid rig (para 11.280).
(4) Install key (23) in rigging nut (24).
(5) Install new cotter pin (22) in key (23).
b. Install handle (6) on release nut (18).
(1) Aline handle (6) with release nut (18).
(2) Install bolt (21) through release nut (18) and
handle (6).
(3) Install washer (20) and nut (19).
GO TO NEXT PAGE
23
22
24
M04-4427-5A
21
20
19
12
18
6
