TM 1-1520-238-23
11-1013
11.237.
DIRECTIONAL CONTROL PEDAL ADJUST SPRING REMOVAL/INSTALLATION continued
b. Remove pedal adjust return spring (7) from
housing (8).
(1) Remove and discard cotter pin (9).
(2) Remove nut (10).
(3) Remove bolt (11) and bushing (12) from
housing (8) and spring (7).
(4) Remove spring (7).
11.237.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
11.237.5. Inspection
a. Check removed and attaching parts for
cracks. None allowed.
b. Check removed and attaching parts for dam-
age (para 11.232).
c. Check removed and attaching parts for corro-
sion (para 1.49).
d. Check all installed bushing(s) and/or bear-
ing(s) for wear (para 11.232).
e. Check all removed bushing(s) and/or bear-
ing(s) for wear (para 11.4).
11.237.6. Installation
a. Install spring (7) on housing (8).
(1) Aline spring (7) on housing (8).
(2) Install bolt (11) through bushing (12), housing
(8), and spring (7).
(3) Install nut (10).
(4) Install new cotter pin (9).
GO TO NEXT PAGE
8
7
11
12
9
M04-4978-2
10
8
7
11
12
9
M04-4978-3
10
