TM 1-1520-238-23
11-1016
11.238.
DIRECTIONAL CONTROL PEDAL ADJUSTING CRANK ASSEMBLY REMOVAL/INSTALLATION
(AVIM) – continued
11.238.5. Inspection
a. Check removed and attaching parts for
cracks. None allowed.
b. Check removed and attaching parts for dam-
age (para 11.232).
c. Check removed and attaching parts for corro-
sion (para 1.49).
d. Check all installed bushing(s) and/or bear-
ing(s) for wear (para 11.232).
e. Check all removed bushing(s) and/or bear-
ing(s) for wear (para 11.4).
f. Check threaded holes for crossed, stripped,
and flattened threads. None allowed.
11.238.6. Installation
a. Install crank (1) on housing (2).
(1) Aline crank (1) and bellcrank (13) on housing
(2).
(2) Install two torque bearing spacers (12) be-
tween housing (2) and crank (1).
(3) Install shaft (11) through housing (2), spacers
(12), and crank (1).
(4) Install two bolts (9) and bushings (10) through
crank (1) and shaft (11).
(5) Install two nuts (8).
(6) Install two new cotter pins (7).
(7) Install bolt (5) through bushing (6), bellcrank
(13), and shaft (11).
(8) Install nut (4).
(9) Install new cotter pin (3).
b. Inspect (QA).
END OF TASK
M04-4431-5
9
12
13
11
1
2
3
4
5
6
7
8
78
10
12
