TM 1-1520-238-23
11-1018
11.239.
CPG DIRECTIONAL CONTROL PEDAL AND PEDAL SKIRT REMOVAL/INSTALLATION – continued
c. Remove pedal (7) from pedal skirt (8).
(1) Remove and discard cotter pin (9).
(2) Remove nut (10), washer (11), and pedal (7).
Use hinged handle.
(3) Remove ball bearing (12) and sleeve spacer
(13) from pedal (7).
(4) Remove bolt (14) from skirt (8).
d. Remove skirt (8) from pivot support (15).
(1) Remove two self-locking nuts (16) and wash-
ers (17).
(2) Remove two shear bolts (18).
(3) Remove skirt (8).
11.239.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
11.239.5. Inspection
a. Check removed and attaching parts for dam-
age (para 11.232).
b. Check removed and attaching parts for corro-
sion (para 1.49).
c. Check all installed bushing(s) and/or bear-
ing(s) for wear (para 11.232).
d. Check all removed bushing(s) and/or bear-
ing(s) for wear (para 11.4).
11.239.6. Installation
a. Install skirt (8) on support (15).
(1) Position skirt (8) on support (15).
(2) Install two bolts (18) through skirt (8) and sup-
port (15).
(3) Install two washers (17) and nuts (16).
GO TO NEXT PAGE
10
9
11
7
12
M04-2163-3
13
14
10
9
12
13
LEFT PEDAL
RIGHT PEDAL
14
8
8
7
11
8
16
17
16
17
18
15
18
M04-2163-6
8
16
17
16
17
18
15
18
M04-2163-7
