TM 1-1520-238-23
11-1028
11.242.
CPG DIRECTIONAL CONTROL PEDAL RELEASE SHAFT ASSEMBLY
REMOVAL/INSTALLATION – continued
e. Remove handle (6) from pedal release nut
(18).
(1) Remove nut (19) and washer (20).
(2) Remove bolt (21) from handle (6).
(3) Remove handle (6).
f. Remove shaft (12) from release nut (18).
(1) Remove and discard cotter pin (22) from ped-
al adjust safety key (23).
(2) Remove key (23) and pedal rigging nut (24)
from shaft (12).
(3) Remove shaft (12).
g. Remove pedal handle pad (25) from handle
(6).
(1) Remove nut (26) and washer (27) from han-
dle assembly extension (28).
(2) Remove extension (28).
(3) Remove pad (25).
11.242.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
11.242.5. Inspection
a. Check removed and attaching parts for
cracks. None allowed.
b. Check removed and attaching parts for dam-
age (para 11.232).
c. Check removed and attaching parts for corro-
sion (para 1.49).
d. Check all installed bushing(s) and/or bear-
ing(s) for wear (para 11.232).
e. Check all removed bushing(s) and/or bear-
ing(s) for wear (para 11.4).
GO TO NEXT PAGE
25
12
23
21
20
6
22
18
M04-4436-4
24
19
28
27
26
