TM 1-1520-238-23
11-1032
11.243.
CPG DIRECTIONAL CONTROL PEDAL HOUSING ASSEMBLY
REMOVAL/INSTALLATION – continued
11.243.3. Removal
a. Remove pedal housing assembly (1) from
support (2).
(1) Remove seven bolts (3) and washers (4) from
housing (1) and support (2).
(2) Remove seven bolts (5), washers (6), and
bushings (7) from housing (1) and support
(2).
(3) Remove housing (1).
11.243.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
11.243.5. Inspection
a. Check removed and attaching parts for dam-
age (para 11.232).
b. Check removed and attaching parts for corro-
sion (para 1.49).
c. Check all installed bushing(s) and/or bear-
ing(s) for wear (para 11.232).
d. Check all removed bushing(s) and/or bear-
ing(s) for wear (para 11.4).
11.243.6. Installation
a. Install housing (1) on support (2).
(1) Aline housing (1) with support (2).
(2) Install seven bolts (5) through washers (6),
bushings (7), housing (1), and support (2).
(3) Install seven bolts (3) through washers (4),
housing (1), and support (2).
GO TO NEXT PAGE
2
1
4
3
7
5
6
M04-4438-2
1
2
4
3
7
5
6
M04-4438-3
