TM 1-1520-238-23
11-1086
Change 5
11.259.
DIRECTIONAL F.S. 348 PUSH-PULL ROD WITH GUIDES REMOVAL – continued
e. Remove forward end of rod (8) from bellcrank
(13).
(1) Remove and discard cotter pin (14).
(2) Remove nut (15).
(3) Remove bolt (16) and bushing (18).
f. Pull rod (8) forward until aft end is clear.
g. Remove three guides (19) from guide mounts
(20).
(1) Remove six bolts (21) and washers (22), from
inboard side of guide mounts (20).
(2) Remove three bolts (23) and washers (24),
from outboard side of guide mounts (20)
while lifting rod (8) until guides (19) are re-
moved.
h. Remove rod (8) with three guides (19), and
washers (24.1), if installed, from helicopter.
i. Remove three guides (19) from rod (8).
11.259.4. Cleaning
a. Wipe removed and attaching parts with a
clean rag.
11.259.5. Inspection
a. Check removed and attaching parts for dam-
age (para 11.232).
b. Check removed and attaching parts for corro-
sion (para 1.49).
c. Check all installed bushing(s) and/or bear-
ing(s) for wear (para 11.232).
d. Check all removed bushing(s) and/or bear-
ing(s) for wear (para 11.4).
GO TO NEXT PAGE
M04-1792-8
M04-1792-2A
16
18
15
14
13
8
M04-1792-4A
23
24
21
22
21
22
8
19
20
24.1
24.1
M04-1792-5
8
19
19
