TM 1-1520-238-23
11-1102
Change 6
11.262.
TAIL ROTOR SWASHPLATE REMOVAL/INSTALLATION – continued
11.262.6. Repair
NOTE
This repair is typical for either swashplate
ring clevis.
a. Prepare clevis (28) mounting surface for re-
pair.
(1) Remove washer (29) from clevis (28), if nec-
essary.
(2) Remove all sealant from clevis (28) mounting
surface. Use methyl propyl ketone
(item 125A, App F) and pad (item 130,
App F).
(3) Dry clevis (28) mounting surface with a clean
cloth. Use cloth (item 52, App F).
b. Repair clevis (28) by replacing washer (29).
(1) Mount washer (29) between and on inboard
clevis (28). Use adhesive (item 2, App F).
(2) Insert 5/16-inch bolt (30) through clevis (28)
and washer (29).
(3) Clamp washer (29) to clevis (28). Use camloc
pliers and sheet metal holder.
(4) Remove bolt (30).
(5) Allow adhesive to cure 24 HOURS.
c. Prepare and paint surface of clevis
(TM 55-1500-345-23).
GO TO NEXT PAGE
M04-1754-17
28
29
30
