TM 1-1520-238-23
Change 1
11-1105
11.262.
TAIL ROTOR SWASHPLATE REMOVAL/INSTALLATION – continued
e. Install opposite side of swashplate (2) on bell-
crank (16). Torque nut (23) 65 to 85 INCH-
POUNDS.
(1) Install bushing (26) in swashplate (2).
(2) Check fit of self-retaining bolt (22) (para
11.1).
(3) Apply primer to bolt (22). Use primer coating
(item 147, App F).
(a) Do not apply primer on threads.
(b) Install wet.
(4) Install bolt (22) through washer (25), bracket
(7), bushing (26), swashplate (2), and bell-
crank (16).
(5) Install nut (23). Torque nut (23) to 65 INCH-
POUNDS. Use torque wrench.
(6) Increase torque to aline cotter pin hole, but do
not exceed 85 INCH-POUNDS.
(7) Install new cotter pin (24).
(8) Apply adhesive to bolts (22) and nut (23). Use
adhesive (item 7, App F).
GO TO NEXT PAGE
22
7
26
2
25
23
24
16
M04-1754-6
VIEW
ROTATED
