TM 1-1520-238-23
11-1109
11.263.
TAIL ROTOR SWASHPLATE CONTROL BELLCRANK REMOVAL – continued
11.263.3. Removal
a. Disconnect directional servocylinder (1) from
bellcrank (2).
(1) Remove and discard cotter pin (3).
(2) Remove nut (4), washer (5), and bushing (6).
(3) Remove bolt (7) and pin (8).
b. Remove bellcrank (2) from swashplate (9).
(1) Remove sealing compound from bolt (10)
and nut (11).
(2) Remove and discard cotter pin (12).
(3) Remove nut (11).
(4) Remove bolt (10), washer (13), bracket (14),
and bushing (15).
(5) To disconnect opposite side of swashplate
(9), remove sealant from bolt (16) and nut
(17).
(6) Remove and discard cotter pin (18).
(7) Remove nut (17).
(8) Remove bolt (16), washer (19), bracket (20),
and bushing (21).
GO TO NEXT PAGE
M04-1756-2
M04-1756-3
1
2
3
7
4
5
6
8
M04-1756-4
15
11
12
2
9
14
13
10
M04-1756-5
16
17
18
20
19
21
OPPOSITE
SIDE
9
