TM 1-1520-238-23
11-1189
11.281.
RIGGING COLLECTIVE FLIGHT CONTROLS BETWEEN PILOT AND CPG COLLECTIVE
STICKS
11.281.1. Description
This task covers:
Rigging.
11.281.2. Initial Setup
Tools:
Aircraft mechanic’s tool kit (item 376, App H)
Flight control rigging kit (item 267, App H)
10 - 50 inch-pound 1/4-inch drive click type torque
wrench (item 434, App H)
Materials/Parts:
Cotter pin
Personnel Required:
67R
Attack Helicopter Repairer
67R3F
Attack Helicopter Repairer/Technical
Inspector
References:
TM 1-1520-238-T
TM 9-1090-208-23
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
2.2
Access panel R200 removed
11.44
Pilot and CPG collective stick covers re-
moved
CAUTION
To prevent damage to flight control sys-
tem components, do not use force if bind-
ing or roughness occurs while moving
controls.
11.281.3. Rigging
a. Remove F.S. 165 rod end (1) from collective
servocylinder input linkage (2).
(1) Remove and discard cotter pin (3).
(2) Remove nut (4) from bolt (5).
(3) Remove bolt (5) and washer (6).
b. Enter pilot station (para 1.56). Observe all
safety precautions.
GO TO NEXT PAGE
M04-3012-5
1
5
2
4
3
M04-3012-6
6
