TM 1-1520-238-23
11-1191
11.281.
RIGGING COLLECTIVE FLIGHT CONTROLS BETWEEN PILOT AND CPG COLLECTIVE
STICKS – continued
j. Remove -3 rig pin (13) from CPG collective
stick (14).
k. Install CPG collective stick cover (para 11.44).
l. Remove -3 rig pin (11) from pilot collective
stick (8).
m. Install pilot collective stick cover (para 11.44).
n. Install F.S. 165 rod end (1) on input linkage (2).
Torque nut (4) 30 to 40 INCH-POUNDS.
(1) Install bolt (5) through washer (6), input link-
age (2), and rod end (1).
(2) Check fit of self-retaining bolt (5) (para 11.1).
(3) Install nut (4) on bolt (5).
(4) Hold bolt (5). Torque nut (4) to 30 INCH-
POUNDS. Use torque wrench.
(5) Increase torque to aline cotter pin hole, but do
not exceed 40 INCH-POUNDS.
(6) Install new cotter pin (3).
o. Remove collective stick warning flag (12).
p. Inspect (QA).
q. Install
gun
turret
assembly
(TM 9-1090-208-23), if removed.
r. Install access panel R200 (para 2.2).
s. Perform collective flight control rigging main-
tenance operational check (TM 1-1520-238-T).
END OF TASK
11
12
M04-3012-4
8
13
14
M04-3012-7
5
2
3
4
1
6
