TM 1-1520-238-23
11-1190
11.281.
RIGGING COLLECTIVE FLIGHT CONTROLS BETWEEN PILOT AND CPG COLLECTIVE
STICKS – continued
c. Rotate friction lock (7) on pilot collective stick
(8) to ZERO.
d. Slowly move pilot collective stick (8) to aline
rig pin hole (9) with collective stick housing
rig pin hole (10).
e. Install -3 rig pin (11). Use flight control rigging kit.
f. Install collective stick warning flag (12) on
stick (8). Use flight control rigging kit.
g. Enter CPG station (para 1.56). Observe all
safety precautions.
h. Install -3 rig pin (13) in CPG collective stick
(14) and housing (15). Use flight control rigging
kit.
(1) If CPG collective stick rig pin slot (16) and
collective housing hole (17) are not alined,
remove
gun
turret
assembly
(TM 9-1090-208-23).
(2) Adjust forward end of collective F.S. 96 push-
pull rod (18) (para 11.2) to aline rig pin slot
(16) and hole (17).
NOTE
Rig pins installed must be a drop-fit con-
dition in holes. (A slight drag of rig pin is
acceptable).
i. Verify drop-fit of -3 rig pins (11) and (13).
GO TO NEXT PAGE
10
12
8
7
M04-3012-1
9
11
M04-3012-2
14
VIEW
ROTATED
16
13
15
17
M04-3012-3
18
