TM 1-1520-238-23
12-113
12.36.
CPG ENGINE FIRE PULL SWITCH REMOVAL/INSTALLATION - continued
d. Remove access panel (1) from control panel
(2).
(1) Remove five screws (3).
(2) Remove panel (1).
NOTE
Both engine fire pull switches must be
removed from control panel to allow
maintenance on either switch.
e. Remove handle (4) from engine fire pull
switch (5).
(1) Pull handle (4) to extended position.
(2) Remove screw (6).
(3) Remove handle (4).
f. Remove switch (5) from panel (2).
(1) Remove two screws (7).
(2) Remove switch (5).
GO TO NEXT PAGE
M04-986-2
3
1
2
M04-986-3
4
5
6
M04-986-4
5
7
2
