TM 1-1520-238-23
15-164
15.43.
APU ENCLOSURE SUPPORT BRACKETS REMOVAL/INSTALLATION - continued
15.43.3. Removal
WARNING
Do not place heater near flammable
material or allow heater to contact
skin: severe burns can result. Wear
protective equipment. If injury occurs,
seek medical aid.
a. Remove support bracket (1) from support (2).
(1) Apply heat to bracket (1) and support assem-
bly (2) for 1 HOUR. Do not exceed 300 F
(148 C). Use heater.
(2) Remove bracket (1) by pulling to break adhe-
sive bond.
b. Remove two support brackets (3) from sup-
port (2).
(1) Apply heat to brackets (3) and support as-
sembly (2) for 1 HOUR. Do not exceed 300 F
(148 C). Use heater.
(2) Remove two brackets (3) by pulling to break
adhesive bond.
c. Remove APU if necessary (para 15.2).
d. Remove two lower support brackets (4) from
support (2).
(1) Apply heat to brackets (4) and support (2) for
1 HOUR. Do not exceed 300 F (148 C). Use
heater.
(2) Remove brackets (4) by pulling to break
adhesive bond.
GO TO NEXT PAGE
M04-2838-2
1
2
M04-2838-3
2
3
M04-2838-4
2
4
4
2
