TM 1-1520-238-23
15-166
15.43.
APU ENCLOSURE SUPPORT BRACKETS REMOVAL/INSTALLATION - continued
15.43.7. Installation
WARNING
Do not place heater near flammable
material or allow heater to contact
skin: severe burns can result. Wear
protective equipment. If injury occurs,
seek medical aid.
a. Prepare support brackets (1), (3), and (4) and
support (2) for bonding.
(1) Apply a uniform coat of primer to mating sur-
faces of parts to be bonded. Use primer
(item 142, App F).
(2) Let primer air dry 30 MINUTES minimum at
room temperature.
(3) Cure primed surfaces 30 to 35 MINUTES at
300 to 310 F (148 to 171 C). Use heater.
GO TO NEXT PAGE
2
M04-2838-6
3
1
4
