TM 1-1520-238-23
16-54
Change 8
16.10.
PYLON ACTUATOR HOSE AND NIPPLE REMOVAL/INSTALLATION
16.10.1. Description
This task covers:
Removal. Cleaning. Inspection. Installation.
16.10.2. Initial Setup
Tools:
Electrical tool kit (item 378, App H)
7/8 x 3/8-inch drive open end socket wrench crowfoot
attachment (item 100, App H)
0 - 600 inch-pound 3/8-inch drive dial indicator torque
wrench (item 447, App H)
Materials/Parts:
Packing
Hydraulic fluid (item 92, App F)
Wire (item 225, App F)
Personnel Required:
68X
Armament/Electrical System Repairer
68X3F
Armament/Electrical System Repairer/
Technical Inspector
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
16.9
Pylon actuator and top plate removed
16.10.3. Removal
a. Remove hose (1) from nipple (2).
(1) Remove lockwire from nut (3).
(2) Hold nipple (2). Remove nut (3).
b. Remove hose (1) from top plate (4).
(1) Remove lockwire from jam nut (5).
(2) Remove nut (5) from hose (1).
(3) Remove hose (1) from plate (4).
c. Remove nipple (2) from actuator (6).
(1) Discard packing (7).
16.10.4. Cleaning
a. Wipe hose, nipple, and mounting area with a
clean rag.
GO TO NEXT PAGE
M04-3414-1
1
3
2
M04-3414-2
1
4
6
7
2
5
1
