TM 1-1520-238-23
Change 8
16-109
16.25.
PYLON RACK BUSHING REPLACEMENT - continued
16.25.3. Removal
a. Remove pylon rack bushing (1) from yoke (2).
(1) Remove and discard cotter pin (3).
(2) Hold bolt (4). Remove nut (5) and washer (6).
(3) Remove bolt (4) and rod end (7) from yoke
(2).
(4) Remove bushing (1) from yoke (2) by tapping
lightly. Discard bushing (1).
16.25.4. Cleaning
a. Wipe actuator rod end and yoke with a clean
rag.
16.25.5. Inspection
a. Check actuator rod end and yoke for cracks.
None allowed.
b. Check actuator rod end and yoke for corro-
sion (para 1.49).
16.25.6. Installation
a. Install new bushing (1) in yoke (2).
(1) Seat bushing (1) by tapping lightly.
GO TO NEXT PAGE
4
M04-2666-2A
2
1
7
6
5
3
1
M04-2666-3
9
9
1
M04-2666-4
