TM 1-1520-238-23
16-112
Change 8
16.26.
PYLON FAIRING AFT BUMPER REPLACEMENT - continued
16.26.4. Cleaning
a. Remove old adhesive from outboard surface
of fairing (2) (para 1.47).
16.26.5. Inspection
a. Check fairing for cracks and delaminated
areas (para 2.30).
b. Check fairing for broken or missing turnlock
fasteners (TM 1-1500-204-23).
NOTE
Bumper may be cut in curved area to
insure proper fit.
16.26.6. Installation
a. Using brush, apply adhesive to outboard sur-
face of fairing (2) and inboard surface of
bumper (1). Use adhesive (item 18, App F) using
brush (item 34, App F).
b. Allow to air dry for 15 MINUTES.
c. Apply bumper (1) to fairing (2). Bumper (1) will
stick
to
fairing
(2)
upon
contact
(TM 1-1500-204-23).
(1) Install 28 rivets (3) and 56 washers (4) on
fairing (2) (TM 1-1500-204-23).
d. Inspect (QA).
e. Install P3 pylon fairing (para 2.2).
END OF TASK
M04-3714-4
1
2
4
3
4
