TM 1-1520-238-23
Change 8
16-111
16.26.
PYLON FAIRING AFT BUMPER REPLACEMENT
16.26.1. Description
This task covers:
Removal. Cleaning. Inspection. Installation.
16.26.2. Initial Setup
Tools:
Electrical tool kit (item 378, App H)
Light duty laboratory apron (item 27, App H)
Chemical protective gloves (item 154, App H)
Adjustable air filtering respirator (item 262, App H)
Materials/Parts:
Rivets (28)
Adhesive (item 18, App F)
Brush (item 34, App F)
Personnel Required:
68X
Armament/Electrical System Repairer
68X3F
Armament/Electrical System Repairer/
Technical Inspector
References:
TM 1-1500-204-23
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
2.2
Pylon fairing P3 removed
NOTE
This task is typical for all four pylons.
16.26.3. Removal
a. Remove bumper (1) from fairing (2).
(1) Remove and discard 28 rivets (3)
(TM 1-1500-204-23).
(2) Remove 56 washers (4).
(3) Remove and discard bumper (1) from fairing
(2).
GO TO NEXT PAGE
M04-3714-1
M04-3714-2
1
2
4
3
4
