TM 1–1520–238–T–1
4–42
4–7
MSL SYSTEM – INTERACTIVE FD/LS
4–7
CHECK
Tools:
Nomenclature
Part Number
M–36 HELLFIRE Training
1300377
missile (2)
Personnel Required:
(2)
References:
TM 9-1090-208-23-2
TM 9-1230-476-20-1
TM 9-1230-476-20-2
TM 9-1425-475-20
TM 9-1427-475-20
TM 11-1520-238-23-2
Equipment Conditions:
Ref
Condition
TM 9-1427-475-20
HMMS launcher(s) installed
TM 9-1425-475-20
Training missiles (2), minimum
installed
NOTE
If the AGPU is selected to provide power to
the aircraft, refer to paragraph 3–1. If the APU
is selected to provide power to the aircraft,
refer to paragraph 3–3.
Utility hydraulics are required for HELLFIRE
missile equipment (HME) SYSTEM–FD/LS
CHECK
1. Perform SYSTEMS – POWER–UP procedures in
accordance with paragraph 3–1.
2. Preset the CPG crew station switch/control settings as
follows after an aircraft power source is on–line.
CPG Station (fig. 2–32)
PANEL
SWITCH/CONTROL
POSITION
(set to)
FIRE
CONTROL
(fig. 2–33)
PLT/GND
CPG
MSL
ORIDE
SAFE
ON
MSL (fig. 2–48)
TYPE
MODE
LOAL
LASER
STBY
OFF
3. Perform FD/LS check as follows:
