TM 1–1520–238–T–1
Change 5
4–45
4–7 MSL SYSTEM – INTERACTIVE FD/LS
4–7
CHECK (cont)
TASK
RESULT
h. Enter the MV data
into the DEK (ADC).
Enter the MV data
into the CDU (ADD).
The MV data is being edited
during this operation and
after the last character has
been entered, the edit mode
is automatically exited (ACY).
Press MID and 2 (E) keys to
save data (ACZ). Go to next
step (ADC). Press VAB 1.
New data will overwrite old
data. Go to step j (ADD).
i. On DEK, press and
release L SHIFT and
STU/7 keys (ADC).
The cursor appears under the
first character in the SPH line
and both begin flashing.
j. Enter SPH data into
DEK (ADC). Enter
the datum data
preceded by D into
the CDU (ADD).
The SPH data is being edited
during this operation and
after the last character has
been entered, the edit mode
is automatically exited (ACY).
Press MID and 2 (E) keys to
save data (ACZ). Go to next
step (ADC). Press VAB 1.
New data will overwrite old
data. Go to step m (ADD).
k. On DEK, press and
release the ENTER
SPACE key (ADC).
The first page of the aircraft
position menu is displayed.
l. On DEK, press and
release L SHIFT and
PQR/6 keys (ADC).
The cursor appears under the
first character in the PPOS
line and both begin flashing.
m. Enter PPOS data
into the DEK (ADC).
Enter the present
position (PPOS)
data into the CDU
(ADD).
The PPOS data is being
edited during this operation
and after the last character
has been entered, the edit
mode is automatically exited
(ACY). Press MID and 2 (E)
keys to save data (ACZ).
Press VAB 1. New data will
overwrite old data (ADD).
