TM 1–1520–238–T–3
Change 5
25–1
CHAPTER 25
PILOT FIRE CONTROL PANEL (FCP) MULTIPLEX READ CODES
FAILURE SYMPTOM INDEX
Symptom
Refer to paragraph
PILOT CANNOT ADJUST IHADSS FLIR VIDEO LEVEL . . . . . . . . . . . . . . . . . . 25–1
PILOT CANNOT ADJUST IHADSS FLIR GAIN LEVEL . . . . . . . . . . . . . . . . . . . . 25–2
PILOT CANNOT ADJUST IHADSS FLIR BRIGHTNESS LEVEL . . . . . . . . . . . . 25–3
PILOT CANNOT ADJUST IHADSS FLIR CONTRAST LEVEL . . . . . . . . . . . . . . 25–4
PILOT CANNOT SELECT OPTIMUM GAIN AND LEVEL OF NIGHT VISION
SENSORS (ACM) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25–5
PILOT CANNOT BORESIGHT IHADSS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25–6
PILOT CANNOT SELECT CPG VIDEO . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25–7
PILOT CANNOT SELECT GRAY SCALE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25–8
PILOT CANNOT ARM ROCKETS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25–9, 25–10
PILOT CANNOT ARM MISSILES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25–9, 25–12
PILOT CANNOT SELECT GUN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25–14
GUN DOES NOT GO TO FIXED FORWARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25–15
PILOT CANNOT SELECT HMD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25–16
PILOT CANNOT SELECT PNVS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25–16
PILOT CANNOT SELECT TADS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25–16
PILOT CANNOT SELECT CUEING SYMBOLOGY OR NVS DOES NOT GO
TO FIXED FORWARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25–17
Personnel Required:
(2)
References:
TM 9–1230–476–20–2
Equipment Conditions:
Ref
Condition
TM 9–1230–476–20–2
MULTIPLEX SUBSYSTEM
– MAINTENANCE
OPERATIONAL CHECK in
progress
NOTE
All multiplex read code responses are read from right to
left.
Multiplex read codes must be used in conjunction with
applicable Maintenance Operational Check (MOC) in
progress.
Multiplex read codes are observed on the HOD (ADC) or
CDU (ADD).
