TM 1-1520-238-T-5
7109
731.
TAIL WHEEL LOCK PANEL EDGELIGHT IS NOT LIGHTED
731
Tools:
Nomenclature
Part Number
Tool Kit, Electrical
SC518099CLA06
Repairers
Multimeter, Digital
AN/PSM-45
Personnel Required:
68X
Armament/Electrical Systems Repairer (2)
References:
TM 1-1520-238-T-6
TM 1-1520-238-23
WARNING
Turn off power before detaching or
attaching wires and connectors. High
current 28 VDC or 115 VAC is present.
Failure to do so could result in death or
serious injury.
1. Check LT PRI circuit breaker.
Does circuit breaker stay closed?
YES
Go to step 2.
NO
Refer to TM 1-1520-238-T-6 to
troubleshoot pilot edgelights.
2. On pilot INTR LT panel, turn INST control knob
to full BRT. Check for 5 VDC between
(A331)J1POS and case.
Is voltage present?
YES
Replace pilot TAIL WHEEL lock
panel (TM 1-1520-238-23).
NO
Go to step 3.
3. Check for 5 VDC between (A326):
J6B8 and J6B7.
Is voltage present?
YES
Repair open wire between:
(A331)J1POS and J527A12,
(A331)J1CASE and J527A13,
P527A12 and P473B8,
P527A13 and P473B7.
Go to paragraph 721.
NO
Go to step 4.
4. Check for 5 VDC at (A326):
TB131K and TB132K.
Is voltage present?
YES
Repair open wire between
(A326):
TB131K and J6B8,
TB132K and J6B7.
Go to paragraph 721.
NO
Refer to TM 1-1520-238-T-6 to
troubleshoot pilot edgelights.
END OF TASK
