TM 1-1520-238-T-5
8–84
8–18.
PILOT TGT INDICATOR – DOES NOT INDICATE FULL SCALE OR SHOW DIGITAL 888 OR
8–18
VERTICAL SCALE INDICATORS HAVE EVERY OTHER LAMP NOT LIGHTED
Tools:
Nomenclature
Part Number
Tool Kit, Electrical
SC518099CLA06
Repairer’s
Multimeter, Digital
AN/PSM-45
Personnel Required:
68X
Armament/Electrical Systems Repairer (2)
References:
TM 1-1520-238-23
WARNING
Turn off power before detaching or
attaching wires and connectors. High
current 28 VDC or 115 VAC is present.
Failure to do so could result in death or
serious injury.
1. On pilot dim/test panel, set and hold
DGT OFF/NORM/TST switch to TST. Check for
short between P68–17 and ground.
Does short exist?
YES
Go to step 2.
NO
Repair open wire between
P68–17 and (A326)TB1–50–C.
Go to paragraph 8–10.
2. Check for 2 to 5 VDC at P68–7 and P68–8.
Is voltage present?
YES
Go to step 3.
NO
Go to step 6.
3. Check for:
5 VDC at P68–12,
–8 VDC at P68–13,
8 VDC at P68–14.
Are voltages present?
YES
Go to step 4.
NO
Go to step 5.
4. Check for open between:
P68–9 and GS427–A,
P68–10 and GS427–B,
P68–11 and GS251–L.
Does open exist?
YES
Repair open wire.
Go to paragraph 8–10.
NO
Replace pilot TGT indicator
(TM 1-1520-238-23).
5. Check for open between:
P68–12 and P400–17,
P68–13 and P400–11,
P68–14 and P400–3.
Does open exist?
YES
Repair open wire.
Go to paragraph 8–10.
NO
Replace SDC
(TM 1-1520-238-23).
6. Check for open between:
P68–7 and P400–29,
P68–8 and P400–35.
Does open exist?
YES
Repair open wire.
Go to paragraph 8–10.
NO
Replace SDC
(TM 1-1520-238-23).
END OF TASK
