TM 1-1520-238-23
2-12.2
Change 4
2.1.
ACCESS PROVISIONS – INSPECTION/REPAIR – continued
NAME/
ACCESS NO.
ACCESS TO
PART NUMBER
NSN
CATEGORY
Fairing L140
Ammunition Feed Mechanism
(fwd)
7-311150140-153
III
Fairing T205R
Main Rotor Shaft
7-311150115-30
III
Fairing T205L
Main Rotor Shaft
7-311150115-29
III
Panel R200
Main Rotor Transmission
7-311150112-56
III
Panel L200
Main Rotor Transmission
7-311150112-55
III
Fairing R410
Tail Rotor Drive Shaft
7-311150130-45
III
Fairing R475
Tail Rotor Drive Shaft
7-311150131-47
III
Fairing L530
Vertical Stabilizer, Leading
Edge
7-311122622-51
III
Fairing T355
Tail Rotor Shaft
7-311150110-43
III
Door T250R
Deck Area
7-311150146-91
III
Door T250R
Deck Area
7-311150146-89
III
(d) General Conductive Coating (Silver Paint) Criteria.
NOTE
Black silver oxide is acceptable with silver conductive paint. Black silver oxide occurs with the silver
pigment in conductive paint and is highly conductive. Removal of black silver oxide is not required.
1 Contaminates on or near edges such as fuel, oils and dirt must be cleaned to prevent coating of
gaskets and conductive paint.
2 Cracks for peeling of conductive coatings must be repaired by cleaning and re-coating of the
damaged areas. Cuts or scratches that do not penetrate through the conductive coating is permis-
sible.
