TM 1-1520-238-23
3-159
3.45.
TAIL LANDING GEAR TRAILING ARMS REMOVAL/INSTALLATION – continued
c. Remove wire harness (12) from trailing arm
(5).
(1) Detach connector P760 (13) from receptacle
J760 (14).
(2) Hold four screws (15). Remove nuts (16) and
washers (17).
(3) Remove four screws (15).
(4) Remove receptacle J760 (14) from bracket
(18).
(5) Clean sealant from screw (19) and nut (20)
(para 1.47).
(6) Hold screw (19). Remove nut (20) and wash-
er (21).
(7) Remove screw (19), bracket (18), and bond-
ing strap (22).
(8) Hold screw (23). Remove nut (24) and wash-
er (25).
(9) Remove screw (23) and clamp (26).
d. Remove trailing arm (5) from pivot lugs (27).
(1) Remove and discard cotter pins (28).
(2) Hold two bolts (29). Remove two nuts (30)
and washers (31). Use box wrench.
(3) Support trailing arm (5). Remove two bolts
(29) and washers (32). Use box wrench.
(4) Pull arm (5) away from pivot lug (27) and
bearing (33). When trailing arms are re-
moved, shims (34) will fall out.
GO TO NEXT PAGE
RIGHT SIDE
M04-0038-9
20
16
19
17
15
12
23
14
18
13
5
22
21
24
26
25
M04-0038-2
28
30
31
34
33
32
29
27
5
5
29
32
27
34
28
31
33
30
LEFT SIDE
RIGHT SIDE
