TM 1-1520-238-23
3-200
Change 4
3.56.
PILOT BRAKE MASTER CYLINDERS REMOVAL/INSTALLATION – continued
NOTE
Perform steps g., f., and h. from gun tur-
ret compartment.
e. Remove debris covers (14) and (15).
(1) Remove 23 screws (16), bolt (17), and 24
washers (18).
(2) Remove debris covers (14) and (15).
f. Remove tube (8) from tube elbow (25).
(1) Remove tube nut (26) from elbow (25).
(2) Remove tube (8) from elbow (25).
g. Remove cylinder brake cap (19) from mount-
ing bracket (20).
(1) Remove and discard cotter pin (21).
(2) Hold bolt (22). Remove self-locking nut (23).
(3) Remove bolt (22) and sleeve bushing (24).
(4) Remove cap (19) from bracket (20).
(5) Remove cylinder (1).
NOTE
Go to step h. if master cylinder is to be
replaced.
h. Remove elbow (25) from cylinder brake cap
(19).
(1) Remove lockwire from nut (27).
(2) Loosen nut (27) on elbow (25). Remove el-
bow (25) from cap (19).
(3) Remove and discard packing (28) and retain-
er (29).
GO TO NEXT PAGE
M04-2746-9
M04-2746-10
15
18
16
14
18
16
18
17
18
15
16
M04-2746-4B
21
23
19
20
24
22
28
27
25
8
26
19
1
29
