TM 1-1520-238-23
Change 4
3-203
3.56.
PILOT BRAKE MASTER CYLINDERS REMOVAL/INSTALLATION – continued
NOTE
Perform steps c. thru e. from gun turret
compartment.
c. Install cap (19) with elbow (25) facing out-
board for left cylinder (1); inboard for right
cylinder (1).
(1) Insert rod end (30) of cylinder (1) through
opening in pilot station floor.
(2) Position cap (19) in bracket (20).
NOTE
Install bolt with head facing inboard.
(3) Install bolt (22) through bracket (20), bushing
(24), and cap (19).
(4) Hold bolt (22). Install nut (23).
(5) Install new cotter pin (21) in bolt (22).
d. Install tube (8) on cylinder (1).
(1) Position tube (8) against cylinder (1) through
opening in pilot station floor.
(2) Install nut (26) on elbow (25).
(3) Hold elbow (25) with tube (8) against cylinder
(1). Tighten nut (26).
(4) Tighten nut (27).
(5) Lockwire nut (27) to screw (33) in cap (19).
Use wire (item 224, App F).
e. Install debris covers (14) and (15).
(1) Aline forward cover (15) holes.
(2) Aline aft cover (14) holes.
(3) Install 23 screws (16) and bolt (17) through
24 washers (18) and covers (14) and (15).
(4) Apply sealing compound to faying surface of
covers (14) and (15). Use sealing compound
(item 176, App F).
GO TO NEXT PAGE
VIEW ROTATED
VIEW ROTATED
19
21
23
24
22
20
M04-2746-6A
26
27
25
1
8
33
15
14
16
18
18
17
18
16
M04-2746-11B
