TM 1-1520-238-23
2-143
2.51.
PILOT/CPG STATION ACCESS DOOR CANOPY PAWL FASTENER
REMOVAL/INSTALLATION – continued
2.51.6. Installation
NOTE
Before installing a new pawl fastener it
must be re-keyed, by an approved
locksmith, to the aircraft code carried
in the aircraft DA form 2408-15.
Lock alinement key must face up for
proper lock operation.
a. Install fastener (2) on doubler (12). Torque nut
(16) to 25 INCH-POUNDS.
(1) Install fastener (2), lockwasher (17), and nut
(16).
(2) Torque nut (16) to 25 INCH-POUNDS. Use
crowfoot and torque wrench.
NOTE
To prevent improper pawl fastener opera-
tion, aline lock lever with raised half of
lever angled down and index key against
lower raised section of pawl fastener.
(3) Install lever (15) angled down and index tab
(18) against lower raised section of fastener
(2).
(4) Install plate (14) with smaller radius facing aft.
(5) Apply primer to threads of two screws (13).
Use sealing compound primer (item 146,
App F).
(6) Install two screws (13).
GO TO NEXT PAGE
M04-3329-6
12
17
16
2
14
13
15
18
19
