TM 1-1520-238-23
2-140
2.50.
CANOPY VENT HANDLE ASSEMBLY REMOVAL/INSTALLATION – continued
2.50.5. Inspection
a. Check airframe for cracks, dents, and corro-
sion (para 2.12).
b. Check airframe for stripped or damaged nut-
plates (TM 1-1500-204-23).
c. Check handle for corrosion (para 1.49).
d. Check handle for cracks, warps, dents, and
gouges. None allowed.
e. Check handle for a broken spring. None al-
lowed.
f. Check handle for loose or missing hardware.
None allowed.
2.50.6. Installation
a. Install handle (1) on airframe (7).
(1) Aline handle (1) with airframe (7) mounting
holes.
(2) Install three screws (8) and washers (9).
b. Install handle (1) on vent (2).
(1) With vent (2) closed, adjust clevis (5) to aline
mounting holes in clevis (5) and connecting
rod (6).
(2) Install pin (4) through mounting hole in clevis
(5) and connecting rod (6).
(3) Install new cotter pin (3) in pin (4).
c. Inspect (QA).
END OF TASK
M04-3316-3
8
1
7
9
M04-3316-4
1
4
5
2
3
6
