TM 1-1520-238-23
2-138
2.49.
BOW BEAM HANDLE REMOVAL/INSTALLATION – continued
2.49.4. Cleaning
a. Wipe removed and attaching parts and sur-
faces with a clean rag.
2.49.5. Inspection
a. Check mounting bracket for cracks. None al-
lowed.
b. Check mounting bracket for corrosion (para
1.49).
2.49.6. Installation
a. Install handle (1) on bracket (2). Torque four
nuts (3) to 32 INCH-POUNDS.
(1) Position handle (1) on bracket (2) with mount-
ing holes (6) alined.
(2) Install four screws (5), washers (4), and nuts
(3).
(3) Torque four nuts (3) to 32 INCH-POUNDS.
Use torque wrench.
b. Inspect (QA).
c. Install wire strike protection aircraft cable cut-
ter blade (para 2.193).
END OF TASK
M04-3542-2
3
4
5
1
2
6
