TM 1-1520-238-23
2-141
2.51.
PILOT/CPG STATION ACCESS DOOR CANOPY PAWL FASTENER
REMOVAL/INSTALLATION
2.51.1. Description
This task covers:
Removal. Cleaning. Inspection. Installation.
2.51.2. Initial Setup
Tools:
Aircraft mechanics tool kit (item 376, App H)
Light duty laboratory apron (item 27, App H)
7/8 x 3/8-inch drive open end socket wrench crowfoot
attachment (item 100, App H)
Chemical protective gloves (item 154, App H)
Adjustable air filtering respirator (item 262, App H)
0 - 75 inch-pound 1/4-inch drive dial indicator torque
wrench (item 446, App H)
Materials/Parts:
Sealing compound primer (item 146, App F)
Personnel Required:
67R
Attack Helicopter Repairer
67R3F
Attack Helicopter Repairer/Technical
Inspector
Equipment Conditions:
Ref
Condition
1.57
Helicopter safed
NOTE
Before installing a new pawl fastener it
must be re-keyed, by an approved
locksmith, to the aircraft code carried
in the aircraft DA form 2408-15.
The following task is typical for pilot
and/or CPG door canopy pawl fasten-
ers except where noted.
Pilot and CPG door canopy pawl fas-
tener and door handle locations differ.
2.51.3. Removal
a. Enter pilot/CPG station (para 1.56). Observe
all safety precautions.
b. Verify canopy access door handle (1) is set to
the closed position.
c. Set canopy installation pawl fastener (2) to
lock position using door key (3).
GO TO NEXT PAGE
M04-3329-1
3
2
2
1
2
1
3
2
PILOT CANOPY DOOR
CPG CANOPY DOOR