TM 1-1520-238-23
Change 3
2-265
2.76.
MAIN LANDING GEAR LEFT SHOCK STRUT STRUCTURAL SUPPORT
REMOVAL/INSTALLATION – continued
2.76.3. Removal
a. Remove wire harness support bracket (1)
from airframe (2).
(1) Remove three screws (3) and washers (4)
from bracket (1) and airframe (2).
NOTE
Wire harness support bracket may be
tilted forward or aft for better access to
shock strut structural support nuts.
It may be necessary to loosen or re-
move wire bundle clamps and reposi-
tion wire bundles for access to nuts
inside left hand console.
b. Remove left main landing gear shock strut
structural support (5) from airframe (2).
(1) Remove shear bolt (6) from support (5).
(2) Remove bolt (7), self-locking nut (8), washer
(9), and two washers (10) from support (5).
(3) Remove shear bolt (11) and two bolts (12)
from support (5).
(4) Remove shear bolt (13), self-locking nut (14),
and washer (15) from support (5).
(5) Remove nine shear bolts (16), self-locking
nuts (17), and washers (18) from support (5).
(6) Remove shear bolts (19) and (20), two self-
locking nuts (21), and washers (22) from sup-
port (5). Use torque wrench adapter.
(7) Remove two shear bolts (23), self-locking
nuts (24), and washers (25) from support (5).
GO TO NEXT PAGE
M04-3744-8
3
4
1
3
4
2
M04-3744-2A
10
8
15
13
6
7
12
11
14
9
5
2
M04-3744-3A
18
17
26
23
16
16
16
2425
22
21
20
19
5
2
