TM 1-1520-238-23
2-268.2
Change 8
2.76.
MAIN LANDING GEAR LEFT SHOCK STRUT STRUCTURAL SUPPORT
REMOVAL/INSTALLATION – continued
(9) Install nine bolts (16), washers (18), and nuts
(17) on support (5). Torque nuts (17) to 90
INCH-POUNDS. Use torque wrench.
(10) Install bolt (13), washer (15), and nut (14) on
support (5). Torque nut (14) to 90 INCH-
POUNDS. Use torque wrench.
b. Torque two bolts (12) to 158 FOOT-POUNDS.
Use torque wrench.
NOTE
Torque on bolts (6), (7), and (11) before
MWO 1-1520-238-50-46 has been ap-
plied is 125 FOOT-POUNDS. Torque on
bolts after MWO 1-1520-238-50-46 has
been applied is 79 FOOT-POUNDS.
c. Torque three bolts in order (6), (7), and (11) to
79 or 125 FOOT-POUNDS. Use torque wrench.
d. Torque bolts (19) and (20) to 90 INCH-
POUNDS. Use torque wrench and torque wrench
adapter.
NOTE
Tighten or install wire bundle clamps if
loosened or removed.
e. Install bracket (1) on airframe (2).
(1) Aline bracket (1) with airframe (2) mounting
holes.
(2) Install three screws (3) and washers (4)
through bracket (1) in airframe (2).
f. Inspect (QA).
GO TO NEXT PAGE
18
17
14
15
13
16
17
18
16
5
M04-3744-10
M04-3744-7A
6
11
12
7
20
19
M04-3744-9
3
4
1
2
3
