TM 1-1520-238-23
Change 8
2-297
2.85.
LATERAL SERVOCYLINDER WIRE HARNESS SUPPORT BRACKET
REMOVAL/INSTALLATION – continued
g. Attach connector (L35)P415 (8) to receptacle
J415 (9).
h. Attach connector (L35)P225 (6) to receptacle
J225 (7).
CAUTION
Ensure lockwire does not pre-load plug
side of connector in either direction. En-
sure anti-chafe tubing is positioned so
that no chafing between lockwire and
connector bracket occurs.
i. Lockwire connector P225 (6) around connec-
tor bracket (2) and back to connector P225 (6).
Use wire (item 222, App F) and tubing
(item 213A, App F).
j. Lockwire connector P415 (8) around connec-
tor bracket (2) and back to connector P415 (8).
Use wire (item 222, App F) and tubing
(item 213A, App F).
k. Install clamp (1) on bracket (2).
(1) Position clamp (1) on bracket (2).
(2) Install bolt (3) through clamp (1).
(3) Hold bolt (3). Install washer (5) and nut (4).
l. Inspect (QA).
m. Install forward fuel cell (para 10.29).
n. Install carrier drive assembly and ammunition
storage magazine (TM 9-1090-208-23).
o. Install access panels L200 and R200 (para
2.2).
END OF TASK
M04-3596-8A
3
5
4
7
2
6
8
9
1
