TM 1-1520-238-23
2-302
2.87.
ROTOR SUPPORT MIXER ASSEMBLY IDENTIFICATION PLATE REPLACEMENT
2.87.1. Description
This task covers:
Removal. Cleaning. Installation.
2.87.2. Initial Setup
Tools:
Aircraft maintenance tool kit (item 372, App H)
Light duty laboratory apron (item 27, App H)
Metal stamping die set (item 107, App H)
Chemical protective gloves (item 154, App H)
1 1/4-inch blade putty knife (item 199, App H)
Adjustable air filtering respirator (item 262, App H)
Adjustable air filtering respirator (item 262, App H)
Materials/Parts:
Adhesive (item 13, App F)
Brush (item 34, App F)
Cloth (item 52, App F)
Isopropyl alcohol (item 106, App F)
Personnel Required:
67R
Attack Helicopter Repairer
67R3F
Attack Helicopter Repairer/Technical
Inspector
WARNING
FLIGHT SAFETY PART
The rotor support mixer assembly is a
flight safety part. Failure to follow
maintenance instructions may result
in serious injury or death of
crewmembers and/or serious damage
to the helicopter.
2.87.3. Removal
a. Record all identification data found on identi-
fication plate (1) for later reference.
b. Remove identification plate (1) from rotor sup-
port mixer assembly (2).
(1) Peel up corner of plate (1). Use putty knife.
(2) Remove and discard plate (1) from assembly
(2).
GO TO NEXT PAGE
M04-3848-1
2
1
