TM 1-1520-238-23
2-350.4
Change 2
2.95A.
LEFT HAND OR RIGHT HAND LONGERON REMOVAL/INSTALLATION – continued
NOTE
Support brackets are removed from lon-
geron with wire harness clamps installed.
g. Remove three wire harness support brackets,
(30), (31), and (32) from right hand longeron
(12).
(1) Remove three screws (33), washers (34),
clamps (35), and spacers (36) from brackets
(30), (31), (32), and longeron (12).
(2) Remove nine screws (37) and washers (38)
from brackets (30), (31), (32), and longeron
(12).
(3) Remove brackets (30), (31), and (32) from
longeron (12).
NOTE
Left and right hand longeron removal typ-
ical.
h. Remove longeron (12) from forward cross
over support (39), and aft cross over support
(40).
(1) Remove two screws (41), retainer (42), and
pads (43) from longeron (12) and aft cross
over support (40).
(2) Remove two screws (44), washers (45), and
pads (46) from longeron (12) and aft cross
over support (40).
(3) Remove two screws (47) and washers (48)
from longeron (12) and forward cross over
support (39).
GO TO NEXT PAGE
M04-5105-8
38
35
36
34
33
30
36
33
34
35
37
38
37
36
32
31
12
37
38
33
34 35
M04-5105-9
44
46
42
43
45
40
48
47
39
41
12
12
48
47
VIEW ROTATED
LEFT HAND SHOWN
VIEW ROTATED
